Bath Bomb Press (Maker)

Lip Balm and Pouring Trays

Soap Making Tools and Accessories

Beginner Soap Makers Suggestions

Liquid Soap

Soap Making Questions

Candle Wax Equipment

Loaf Soap Cutters

Soap Molds & Liners

Custom Single Bar Mold, Shapes, Graphic Designs

Lye Tanks

Soap Shaper

Drying Trays

Oil - Wax Melters

Soap Stampers

Financing

Professional Air Soap Cutter System

Soapmaker Software

Formulation

Professional Manual Soap Cutter System

Start Up Questions

General Information - Cutters & Molds & Mold Liners

Pumps

Warranty

General Questions

Scales (General) - (Troubleshooting)

Hot Process Soap

Shipping

Click to Enlarge

Click to Enlarge

Question:

Can I use the Pot Whipper on a small test batch?

Answer:

The Pot Whipper is best used on batches of several gallons (25 lbs or more). It is too large for test batching. The best thing for this is our small commercial Power Wand (PB08)

Scales

Question:

Do you have scales that will weigh the oils and lye, both in and out of the tanks?

Answer:

Yes, we do. We carry 500 and 1000 pound scales just for this purpose.

Question:

I see that you have soap molds and soap cutters but I am concerned about the smaller items like respirators, small scales and other supplies that I need in order to get my soap business going. Can you recommend someone who carries both?

Answer:

You can find a number of these products on our website. We carry a full line of accessories – all of the little miscellaneous items you need for material handling, safety, mixing, measuring, etc. etc. We are constantly adding to this list.

Question:

Do your thermometers need to be re-calibrated if you live in high country in order to make soap?

Answer:

You can either recalibrate or allow 1 degree for every 500 feet of elevation above sea level.  So, if you live in Denver, as an example, you would figure the boiling point at 202 F.