As a time saver, can I premix my oils in the heater and use them up over a period of a week or more? Can the oils be reheated each day or continuously left at 110 degrees without unacceptable degradation of the oils?

Does the Oil-Wax Heater (Melter) maintain a constant temperature at the level required?

Purchasing and/or Continuing

the Use of Any of the

Equipment & Accessories on

SoapEquipment.com's Website

In Your Handcrafted

Bodycare Business.

Will Cause You To:

	Increase Your Profit Margin...
	Become More Efficient...
	Increase Your Productivity...
	Have More Time...
	Enjoy What You Do Even More...
	Make More Money...

Printer-Friendly Version

65GH

WW65 Oil / Wax Heater (See Note below)

Comes Complete with: Lid, Heater - Thermostat, 1.5 Inch Ball Valve and Cord

$1,160.00 ea

Note: Our Large Oil Heaters (Melters) require special shipping and therefore cannot be added to our cart, for Large Oil Heater orders, Contact Us.

Stainless Steel Small Production Heater, with water jacket.

This unit is best used with our Pot Tipper to heat just the base oils.

Easy to use and maintain, just keep jacket full of water.

For Liquid Soap, this is the perfect vessel, total control for all steps….mixing, tracing, heat stage, dilution and bottling.

Comes Complete with: Lid, Heater - Thermostat, 1.5 Inch Ball Valve and Cord

All stainless steel construction.

Approximately 65 gal (246L) capacity or approximately 520 lbs (236Kg).

Outside dim. are 35" (89cm) high by 29" (74cm) in diameter.

220 Volt, 5000 watt, Heater - Thermostat (50F to 250F) (10C to 121C). Draws about 23 amps, has a 6/30 style plug.

Uses a standard 6-30 NEMA rated plug.

Note: This unit is compatible for all International customers. The plug will have to be changed to conform with local codes.

Flat bottom for easy cleaning.

Double jacketed, with a 1.5” (3.8cm) outlet.

Must be shipped Motor Freight. Crating is included in price.

35GH

WW35 Oil / Wax Heater  (See Note below)

Comes Complete with: Lid, Heater - Thermostat, 1.5 Inch Ball Valve and Cord

$950.00 ea

Note: Our Large Oil Heaters (Melters) require special shipping and therefore cannot be added to our cart, for Large Oil Heater orders, Please Click Here to Contact Us.

Stainless Steel Small Production Heater (Melter), with water jacket.

This unit is best used with our Pot Tipper to heat just the base oils.

Easy to use and maintain, just keep jacket full of water.

For Liquid Soap, this is the perfect vessel, total control for all steps….mixing, tracing, heat stage, dilution and bottling.

Comes Complete with: Lid, Heater - Thermostat, 1.5 Inch Ball Valve and Cord

All stainless steel construction.

Approximately 35 gal (132.5L) capacity or approximately 280 lbs (127Kg).

Outside dim. are 29" (74cm) high by 24" (61cm) in diameter.

220 Volt, 3000 watt, Heater - Thermostat (50F to 250F) (10C to 121C). Draws about 14 amps, has a 6/30 style plug.

Uses a standard 6-30 NEMA rated plug.

Note: This unit is compatible for all International customers. The plug will have to be changed to conform with local codes.

Flat bottom for easy cleaning.

Double jacketed, with a 1.5” (3.8cm) outlet.

Must be shipped Motor Freight. Crating is included in price.

15DJGH

WW15 DJ Oil / Wax Heater

Comes Complete with: Lid, Heater - Thermostat, 1.5 Inch Ball Valve and Cord

$692.00 ea

Comes Complete with: Lid, Heater - Thermostat, 1.5 Inch Ball Valve and Cord

Stainless Steel Small Production Heater (Melter), with water jacket.

For Cold Processed; this unit can be used to heat just the base oils or to heat and mix the entire batch. Using to heat the oils only is the most efficient method.

For Melt and Pour it is perfect for heating large quantities and for dispensing into molds or other containers.

For Liquid Soap, this is the perfect vessel, total control for all steps….mixing, tracing, heat stage, dilution and bottling.

Candle Wax; this is great for melting wax, blending ingredients and dispensing into molds.

Easy to use and maintain, just keep jacket full of water.

All stainless steel construction.

Approximately 15 gal. (63.4L) capacity, 120 lbs (45.44Kg) in weight.

Note: Capacity can vary by + or - 1%

Exterior dimensions18” (46cm) high by 19” (48cm) in diameter.

Interior dimensions approximately 16" x 16"

Flat bottom, double boiler style, water jacket.

120 Volt, 1500 watt, Heater - Thermostat (50F to 250F) (10C to 121C). Draws about 13 amps.

Note: For International customers with 220 volt 50 or 60 cycle we will substitute our 220 volt, 3000 watt, Heater - Thermostat.

Large, 1.5” (3.8cm) outlet.

Can ship via FedEx or UPS. Weighs 45 lbs (20Kg), Oversize @ 70 lbs (32Kg).

Oil Heater Stand Without Wheels

Without Wheels . . .

Oil Heater Stand With Wheels

With Wheels . . .

	Need a way to easily move that Oil -Wax Heater around?
	You can easily move your Oil - Wax Heater room to room or make slight adjustments in position as you are pouring.
	All stands with wheels are 25" high.

Not available for WW15 Double Jacket Oil Heater

Caution: We do not recommend moving Oil Heaters when full or partially full.

1.5 Inch Replacement Ball Valve

for our Oil - Wax Heaters

Three way, polypropylene ball valve. Impervious to sodium or potassium hydroxide. Liquid can flow either horizontally or vertically. Comes set up for 90 degree, down dispensing.

Note:

For those not familiar with the term Ball Valve this is a valve, faucet or means of controlling the flow of liquid. A quick 1/4 turn and all flow of liquid can be shut off. This particular valve allows liquid to quickly flow from a horizontal path to a vertical path for dispensing into vessels or into individual molds. We can supply as an option, reduction fittings for small cavity molds.

Reducer for Oil Heater

Picture of how the

Reducer would attach

to the Ball Valve

Reducer for Oil Heater

for our 1.5 inch Ball Valve

This reducer is great for filling bottles, candle molds, M&P molds, etc. right from the Oil Heater / Melter.

Description:

	For those just getting into filling bottles and not quite ready for our Easy Fill Bottler, this is a great way to start.
	For Candles or M&P (Glycerin Soap) this will save considerable time on filling molds or small cavity soap molds.
	This is much more efficient than pouring into a container and then into a bottle or mold.
	Fits right into our 1 1/2" (38mm) Ball Valve and allows you to turn the 1 1/2" valve fully on and adjust fluid flow or cut the flow on and off, with the smaller 1/2" (13mm) Ball Valve.

Specifications:

	Reduction from 1 1/2" (38mm) Ball Valve to a 3/8" (10mm)flow.
	Fully assembled, no pipe cement or teflon tape needed to attach to 1 1/2" (38mm) Ball Valve.
	Will handle temps up to 220 F (104 C).
	Will handle most acids and alkalis.

HANDcraft Heater Timer 1800 watt

What a great way to have time work for you. Simply set the timer for when you want your Heater or appliance to turn on and walk away.

Have it turn your Drum or Bucket Heater on in the early morning hours so your oils are ready for the work day.

Description:

	You can control your 15 gallon Oil Heater, Drum Heater, Bucket Heater and numerous other appliances with this easy-to-use timer.
	14 ON / 14 OFF settings per day. A total of 98 ON / 98 OFF settings per week.
	Can be used with 4 separate programming options: Same settings Monday through Friday, Same settings Saturday and Sunday, Same settings all 7 days of the week, Various daily settings.
	Has a cover to protect against dust and moisture.

Specifications:

	Replaceable button cell batteries (included) maintains program during power failure.
	Easy hand-held programming
	120 Volts, 60 Hz, 18 inch cord.
	15 Amps, handles up to 1800 watts.
	2 year manufacturer warranty

HANDcraft Heater Timer 7200 watt

Have time work for you and save energy. Just set the timer and your oils will be heated and ready for you the next work day.

Description:

	Save energy; no need to leave your Oil Heater on all night.
	Save time; why waste part of your day waiting for the oils to heat up? Also works with our 80 gallon Lye Tank.