Poly Drum Pump

This is a no effort, no friction pump. It will pump high volumes with little effort

There are no parts to wear or jam.

Harsh chemicals containing mild solvents and viscous fluids can be safely and reliably dispensed.

	Pumps are resistant to a wide range of acid, alkaline, caustic, and chlorine based chemicals, oils, crop chemicals, diesel and liquid fertilizers. Click here for a listing of liquids
	Not to be used with strong solvents, highly flammable liquids or for pumping gasoline (petrol). Most lotions and creams can be pumped. If in doubt, send 1 quart of product to the Hagerstown, Indiana office, (address at bottom of page).

The anti-pumping safety strap deters access and protects against accidental discharge.

Pump is constructed using FDA approved materials.

Primes quickly, in no time your liquids are flowing at a steady rate...

To prevent drips, the outlet spout easily swivels out of the way.

Polypropylene and polyethylene construction - chemical resistant.

True double action pump – innovative, easy, patented pumping technology.

Pumps from base of container – all contents emptied.

Built To Last – long lasting high quality construction.

Will work with any container 36' (91.4cm) or less in height.

Make a cone using a standard 8 ½” by 11” (215mm x 280mm) piece of printer paper.

Roll a cone so the length (height) of the cone is the 8 ½” (215mm) dimension. The top opening should be about 3” (76mm) across and the hole must be ½” (13mm) across.

Put a piece of tape on the overlap to hold the cone together.

Hold the cone loosely in your hand (Do Not Squeeze, that’s cheating :o))

Put 8 ounces (236ml) of your liquid into the cone.

Start counting the drops (globs) of liquid as it runs out.

Counting; one thousand one, one thousand two, one thousand three, etc.; will be close to a second. If you are not sure, time yourself or you can have someone keep time for you.

The pump will pump the liquid if is runs out at about 1 second per glob or less.

More time than that is doubtful. If you want to make doubly sure, send at least 24 ounces of material to us, and we will physically test it in the pump.

Poly Bucket Pump

This is a no effort, no friction pump. It will pump high volumes with little effort

There are no parts to wear or jam.

Harsh chemicals containing mild solvents and viscous fluids can be safely and reliably dispensed.

	Pumps are resistant to a wide range of acid, alkaline, caustic, and chlorine based chemicals, oils, crop chemicals, diesel and liquid fertilizers. Click here for a listing of liquids
	Not to be used with strong solvents, highly flammable liquids or for pumping gasoline (petrol). Most lotions and creams can be pumped. If in doubt, send 1 quart of product to the Hagerstown, Indiana office, (address at bottom of page).

The anti-pumping safety strap deters access and protects against accidental discharge.

Pump is constructed using FDA approved materials.

Reike Spout adaptor and bucket lid adaptor included.

Primes quickly, in no time your liquids are flowing at a steady rate...

To prevent drips, the outlet spout easily swivels out of the way.

Polypropylene and polyethylene construction - chemical resistant.

True double action pump – innovative, easy, patented pumping technology.

Pumps from base of container – all contents emptied.

Built To Last – long lasting high quality construction.

Will work with any container that is 16.5" (419mm) or less in height.

Also, works with 5 gal (19 L) and 8 gal (30 L) jugs as well as 6 gal (23 L) buckets

Make a cone using a standard 8 ½” by 11” (215mm x 280mm) piece of printer paper.

Roll a cone so the length (height) of the cone is the 8 ½” (215mm) dimension. The top opening should be about 3” (76mm) across and the hole must be ½” (13mm) across.

Put a piece of tape on the overlap to hold the cone together.

Hold the cone loosely in your hand (Do Not Squeeze, that’s cheating :o))

Put 8 ounces (236ml) of your liquid into the cone.

Start counting the drops (globs) of liquid as it runs out.

Counting; one thousand one, one thousand two, one thousand three, etc.; will be close to a second. If you are not sure, time yourself or you can have someone keep time for you.

The pump will pump the liquid if is runs out at about 1 second per glob or less.

More time than that is doubtful. If you want to make doubly sure, send at least 24 ounces of material to us, and we will physically test it in the pump.

Universal Motor Head

Save money by using one Motor Head for several pumps.

A light, easily handled, high-performance pump head, for almost all types of slightly viscous, aggressive and non-flammable liquids.

No more waiting for the pump to drain before switching drums, just move the motor.

No more need to flush out the pump, just move the motor.

No maintenance.

Universal motor, 120 volt, 640 watt, 60hz., 0.85 HP. Note: 220 volt available, order below.

Will pump up to 45 gallons (170L) per minute.

Delivery head up to 31 feet (9.5m)

Weight approx. 6.5 lbs. (3kg)

Standard, with extra long, 16' (4.9m) cord.

Bipolar on/off switch with single pole thermal over current release.

Double insulated. Open drip-proof motor.

Not suitable for highly flammable liquids.

Warranty 1 year

Poly Drum Pump Tube

Save money by using one Motor Head for several pumps.

Please note: the item we are describing is the Pump Tube that goes in the drum, the Motor Head is designed to move from one pump tube to the other. Read Motor Head description.

The Poly Pump Tube will pump up to 23 gallons per minute (87L)

Will handle liquids, to temperatures as high as 122F (50C) and pump liquids up to 900cps. Constant duty, 500cps.

Note: cps or centipoise. Centipoise is the measurement used for the viscosity of a liquid. Examples; SAE 50 weight oil is 540cps, soybean oil is 160cps, honey is 3000cps).

High chemical resistance; will pump, caustic soda, vegetable oils, liquid soap, etc. Not to use with alcohol or petroleum products (see Stainless Pump Tube). If any liquid you want to pump is in question please ask.

Maintenance and replacement is extremely easy on these versatile pumps. No special tools required.

See our versatile dispensing nozzle for a great way to dispense from the Drum Pump Tube.

Use with plastic, or metal barrels.

You can even pump out of shorter tanks, buckets, etc. as the Pump Tube allows you to sit right on the bottom of the drum or container.

Included with every Pump Tube is a Drum / Barrel, Bung Adaptor for a standard 2" NPT, bung. Just screw into your drum and slip in the Pump Tube.

Tube diameter 41mm (1.6")

Temperatures to 122F (50C)

Pump Tube material; Polypropylene

Impeller; Polypropylene

Discharge connection, 3/4" (19mm)

Length is 39" (99cm). Other available lengths are, 27" (69cm), 47" (119cm) and lengths up to 78" (198cm).

Weight 39", 9# (4kg).

Warranty 1 year

Stainless Drum Pump Tube

Save money by using one Motor Head for several pumps.

Please note: the item we are describing is the Pump Tube that goes in the drum, the Motor Head is designed to move from one pump tube to the other. Read Motor Head description.

The Stainless Steel Pump Tube will pump up to 29 gallons per minute (110L)

Will handle liquids, to temperatures as high as 212F (100C) and pump liquids up to 900cps. Constant duty, 500cps.

Note: cps or centipoise. Centipoise is the measurement used for the viscosity of a liquid. Examples; SAE 50 weight oil is 540cps, soybean oil is 160cps, honey is 3000cps).

High chemical resistance; will pump, caustic soda, vegetable oils, liquid soap, alcohol and petroleum products. If any liquid you want to pump is in question please ask.

Maintenance and replacement is extremely easy on these versatile pumps. No special tools required.

See our versatile dispensing nozzle for a great way to dispense from the Drum Pump Tube.

Use with plastic, or metal barrels.

You can even pump out of shorter tanks, buckets, etc. as the Pump Tube allows you to sit right on the bottom of the drum or container.

Included with every Pump Tube is a Drum / Barrel, Bung Adaptor for a standard 2" NPT, bung. Just screw into your drum and slip in the Pump Tube.

Tube diameter 41mm (1.6")

Temperatures to 212F (100C)

Pump Tube material; Stainless Steel

Impeller; ETFE (Ethylene TetrafluoroEthylene)

Discharge connection, 1" (25mm)

Length is 39" (99cm). Other available lengths are, 27" (69cm), 47" (119cm) and lengths up to 78" (198cm).

Weight 39", 11# (5kg).

Warranty 1 year

Poly Pump Nozzle Kit

Use with our Poly Pump Tube.

Lever type, Dispensing Nozzle. Similar to a fuel type nozzle. Very positive on and off control.

Long 8' (2.44m) hose.

Tough, reinforced Polypropylene hose and nozzle, withstands, caustic soda, alcohol, vegetable oils, etc.

8' (2.44m) Polypropylene, reinforced, 3/4" (19mm) hose

All connectors necessary for hose and Dispensing Nozzle.

Note: If you are not sure it will pump your product, send a 16oz sample to us. See bottom of this page for address. We will not be able to tell you over the phone.

Stainless Pump Nozzle Kit

Use with our Stainless Steel Pump Tube.

Lever type, Dispensing Nozzle. Similar to a fuel type nozzle. Very positive on and off control.

Long 8' (2.44m) hose.

Tough, reinforced Polypropylene hose and nozzle, withstands, caustic soda, alcohol, vegetable oils, etc.

8' (2.44m) Polypropylene, reinforced, 1" (59mm) hose

All connectors necessary for hose and Dispensing Nozzle.

Note: If you are not sure it will pump your product, send a 16oz sample to us. See bottom of this page for address. We will not be able to tell you over the phone.

1-oz Lotion Transfer Pump

1 oz Lotion Transfer Pump has 11” tube length and a 38 mm cap.

Note: If you are not sure it will pump your product, send a 16oz sample to us. See bottom of this page for address. We will not be able to tell you over the phone.

With the calibrated plunger, you select the quantity you wish to dispense up to 1 oz.

Fits Standard Gallon

38 mm cap.

FDA compliant for food applications

11” tube length

1-oz Lotion Transfer Pail Pump

HANDcraft™ 1 oz Lotion Transfer Pail Pump has 17” tube length.

With the calibrated plunger, you select the quantity you wish to dispense up to 1 oz.

Note: If you are not sure it will pump your product, send a 16oz sample to us. See bottom of this page for address. We will not be able to tell you over the phone.

Fits 5-gallon pails with senior Reike adapter.

Also fits Senior Reike Flex Spouts

Comes with Senior Reike Adapter

17” tube length

Calibrated plunger

8-oz Lotion Transfer Drum Pump

HANDcraft™ 8 oz Lotion Transfer Drum Pump. Will pump most liquids up to the consistency of an average hand lotion or sun screen.

Note: If you are not sure it will pump your product, send a 16oz sample to us. See bottom of this page for address. We will not be able to tell you over the phone.

With the calibrated plunger, you select the quantity you wish to dispense up to 8 oz.

Works on 5 and 6 gallon buckets with Senior Rieke Flex Spout

Works with 15, 20, 30, & 55 gallon drums, with 2” National Pipe Thread openings.

Adapts to standard drum openings, both ¾” and 2” National Pipe Thread.

Adjusts to 2, 4, 6 & 8 ounce settings. (57gr,113gr,170gr, 227gr)

Good Chemical Resistance to many fluids

Spout is 5/8" (16mm) outside diameter, 1/2" (13mm) inside diameter.

Body is 11” (28cm) Long x 2” (5cm) Diameter.