Double celled - to allow for the pouring of two blocks of soap at the same time.
Pro Soap Mold capacity is dependent on the choice of bar size. We try to design around an average 40 lb (18.2 kg) weight per side. Pour weight and block size is personalized to your needs and bar size. As an example a 40 lb (18.2 kg) pour weight, will yield about 160, 4 ounce (100 gram) bars. Please note that this bar weight is not cured weight. For the entire mold (two cells) this would be 320 bars.
Better saponification is achieved in these large molds due to the even sustained temperatures in completing the conversion of oils to glycerin.
Lining and greasing recommended.
Please Note:
We can supply a superb
liner paper made especially for our molds and mold sizes. For very large production capacities over 40,000 bars per month, we can make pre-cut sizes based on your mold design.
Specifications
Made from 3/4” (1.9cm) HDPE plastic
(Molds are White or Black, No Choice).
Dimensions are dependent on final design.
Ideal range of pour weights are 35 to 40 lbs (16 to 18 kilos).
Two cells per mold.
Can be shipped FedEx or UPS.
Diagram of the
Layout of loaves,
in one cell of the
Manual Soap Cutter™ Pro Mold
NOTE:
This is just a sample.
Your bar size will dictate how
many loaves and bars are possible. We will calculate
this for you.
This diagram was based on a bar
that is about 4 oz. or 114 grams when wet cut (first
cut).
Diagram of the
Layout of bars,
in one cell of the
Manual Soap Cutter™ Pro Mold
NOTE:
This is just a sample.
Your bar size will dictate how
many loaves and bars are possible. We will calculate
this for you.
This diagram was based on a bar
that is about 4 oz. or 114 grams when wet cut (first
cut).
We always add a small trim cut, on
the top and bottom of your loaves, (Shaded in
diagram) when figuring how many bars are possible.
13 3/4" (349mm) is maximum pour depth.
Manual & Air Soap Cutter™ Pro Molds are
Custom made and therefore cannot be
added to our cart, for these Soap Mold orders,
Please Click Here
to Contact Us.
Note: All AIr Cutter Molds
require 4 to 6 weeks lead time
These Pro Molds are Custom Made to your specifications and are designed to work with the
Single celled - with grooved bottom to match the loaf-cutting grid on the Air Soap Cutter™.
Pro Soap Mold capacity is dependent on the choice of bar size. We try to design around an average 95 lb (43.2 kg) pour weight. Pour weight and block size is personalized to your needs and bar size. As an example a 95 lb (43.2 kg) pour weight, will
yield about 380, 4 ounce (100 gram) bars. Please note that this bar weight is not cured weight.
Better saponification is achieved in these large molds due to the even sustained temperatures in completing the conversion of oils to glycerin.
Lining and greasing recommended.
Please Note:
We can supply a superb liner paper made especially for our molds and mold sizes. For very large production capacities over 40,000 bars per month, we can make pre-cut sizes based on your mold design.
Made to last from tough, high density plastic.
They are easy to clean.
No maintenance.
Easy to disassemble and de-mold.
Specifications
Made from 3/4” (1.9cm) HDPE plastic
(Molds are White or Black, No Choice).
Dimensions are dependent on final design.
Ideal range of pour weights are 85 to 95 lbs (38.5 to 43 kilos).
Please verify in “Comments” original
purchase name so we can locate your
drawings
$33.00 ea
Tired of sliding your mold around? These dollies make moving your
Air Soap Cutter™ or
Manual Soap Cutter™
Pro Molds, much easier. Simplifies moving your mold into position, to
pour from your Pot Tipper, easy and safe. Works
perfectly with your Pro Soap Mold Cover (See above).
Air
Cutter Mold Dolly Description
4 swivel casters for smooth movement in
any direction.
Air Cutter Pro Mold Dollies are custom
made to fit the underside of your mold. This supports the bottom of
the mold and keeps it flat.
Recommended to keep molds off the floor.
Colds floors can restrict even saponification.
Air Cutter Mold Dolly Specifications
Made of ˝” (13mm) MDF (Medium Density
Fiberboard)
1 ˝” (38mm) non-marking swivel casters.
75 lbs (34kg) capacity per caster.
Can be shipped UPS
Manual Cutter Mold Dolly Description
2 swivel casters and 2 fixed casters.
Manual Cutter Mold Dolly Fits any Manual Cutter™ Mold.
Recommended to keep molds off the floor.
Colds floors can restrict even saponification.
Manual Cutter Mold Dolly Specifications
Made of Polypropylene
Height 4-1/4 in. (108mm) - Length
19-1/2 in. (495mm) - Width 14-3/8 in. (365mm)
We have this special
liner made especially for our soap molds. After many
years of testing many different methods of release,
this is by far the Ultimate.
Many people think that
lining a large mold is hard work and time
- Not True! Large molds are actually
much easier to line than small, hobby and tray
molds.
No
wrinkles, smoothes out perfectly, easy
release, easy to apply.
Our liner is
coated, both sides with food-grade, silicone.
35-40 pound parchment, tough
and tear resistant.
14.25" wide, a perfect
fit for Willow Way Professional Block and Tube
Molds.
Available in 250',
500' and 1000' rolls
Liner Paper Cutter
Model:
AC1180
Soap Mold
Liner Paper Cutter
$42.00 ea
Here is just what is needed to hold your Mold Release Liner.
Roll out what you need and then just lift and cut.
Takes rolls up to 15" wide and 5" in diameter. Will
hold our 1000' roll!
Can be fastened to counter.
The spring loaded cutter bar keeps the paper from
spooling.
We can help you determine your batch size and how to convert your present ingredients to the larger pour.
We know soap. We work with you to find the most efficient pour, mold size and the most efficient use of your time.
Use of this website
signifies your agreement to the
Terms of Use
* All specials are for a limited time only. Offers cannot be
combined with any other discount, offer, promotion or special
incentive program and are not valid on: (a) prior purchases, (b)
prior quotes or offers. Void where prohibited. Please
visit the links above for more information including latest pricing,
availability, and restrictions on each offer. Prices are in U.S. dollars (USD)
$30 minimum purchase (excluding shipping and tax) . All prices and product
availability subject to change without notice. Unless noted, prices
do not include shipping and applicable sales taxes.
Please call or e-mail us with any questions or to place an order.